MOV W,fr |
|
| Description: | Move fr into W |
| Operation: | W = fr |
| Flags affected: | Z |
| Registers affected: | W |
| Sources referenced: | fr |
| Cycles: | 1 |
| Opcode: | |
| Details: | SX Users Manual page # 95 |
| Microchip PIC syntax: | MOVF fr,0 |
| Notes: | |
Phil Pilgrim says: Incidentally, the way to move a register to W without setting any flags is:
SWAP Reg
MOV W,<>Reg
SWAP Reg 'Optional, to restore Reg to original state.
or, if RTW is enabled:
MOV W,<>Reg
SWAP WREG
| file: /techref/scenix/inst/movwfr.htm, 1KB, , updated: 2007/2/28 17:26, local time: 2008/12/3 16:39,
38.103.63.59:LOG IN
|
| ©2008 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? Please DO link to this page! Digg it! <A HREF="http://piclist.org/techref/scenix/inst/movwfr.htm"> SX Instruction MOV W,fr</A> |
| Did you find what you needed? |
|
o List host: MIT, Site host massmind.org, Top posters @20081203 Apptech, Jinx, Xiaofan Chen, olin piclist, Vitaliy, William \Chops\ Westfield, Tamas Rudnai, JonnyMac, Alan B. Pearce, Gerhard Fiedler, * Page Editors: James Newton, David Cary, and YOU! * Roman Black of Black Robotics donates from sales of Linistep stepper controller kits. * Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters. * Monthly Subscribers: Shultz Electronics, Timothy Weber, on-going support is MOST appreciated! * Contributors: Richard Seriani, Sr. |
|
.